The UK's No. 1 Pump & Equipment Distributor
0
My Basket

Saniflo Sanicubic 2 Pro Heavy Duty Macerator for Toilet, Basin, Bath, Bidet and Multiple Grey Water Appliances 240V (6102)

SKU
1102
MRRP £2,480.00 + VAT Our price £1,428.00 (+ VAT) Incl. VAT: £1,713.60
Order within
Hours
Mins
Secs
for next day delivery *i

* Available where Guaranteed Stock Icon Appears Below

Saniflo Sanicubic 2 Pro Heavy Duty Macerator for Toilet, Basin, Bath, Bidet and Multiple Grey Water Appliances 240V - 1102

This model is no longer manufactured and has been replaced with the Sanipro 2 Pro' - Product code 6102. This will be sent as a replacement.

Please check dimensions and details on SKU 6102 for suitability as these items are not identical

The Sanicubic 2 Pro is a high performance macerating pump for commercial use. Contains two separate, load balanced pumps with high performance macerating systems and will operate alternately. In the event of inflow overload, both motors run at the same time, or in the unlikely event that one motor fails, the other one will take over.

 

Features:

  • Ideal for busy commercial situations where business continuity is important
  • Load balanced twin macerator pumps for a failsafe system
  • Alternate activation ensures even wear of motors
  • Two alarms for ultimate safety – hard-wired alarm plus remote wireless alarm
  • Working temperature of 35°C
  • Will handle up to 70°C for short periods
  • IP68 rated
  • Can be connected to a Building Management System.

Please note, isolation valves must be fitted to inlet and discharge pipework for maintenance purposes.

The Sanicubic tank is fitted with 2 dip tubes; one tube controls motor operation and the other controls the alarm system:

  • Long pickup tube (normal operation): as soon as the waste water level in the tank reaches the triggering point in the long tube, the pumping system starts up
  • Short pickup tube (inflow overload operation): if the waste water level in the tank reaches the upper point, a contactis closed and the auxiliary pumping system is triggered. The contact also sets off an audible and visual alarm

IP or “Ingress Protection” ratings specify the environmental protection that the product casing provides and are defined by international standards. They are used to explain levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies e.g. dust, dirt and moisture.  Sanicubic  has rating IP67 which gives protection against temporary immersion in water.

More Information
SKU 1102
Manufacturer Saniflo
Manufacturers Warranty 2 Years
Weight 30.0 Kg
Dimensions 557mm High x 491mm Wide x 408mm Deep
Motor Size (kW/W) 1500W per motor
Full Load Current (FLC) 6.0A
Voltage 240V 1Ph 50Hz
Max Flow 12 m3/hr
Max Head 11m
Material Plastic

Delivery

We offer free standard delivery to any UK address on a 3-5 working day delivery time on all orders over the value of £45 + vat. This is not weight restricted

Next day delivery is charged at £12.50 + vat for items under 35kgs.  Orders need to be placed before 5pm Mon-Thurs or 4:30 on Friday for guaranteed Next Day Delivery.

Next day delivery is not available for UK Highlands and Islands. Please click the following link to view postcodes/areas that don't qualify for next day delivery.

 

Due to some product specifications, there may be a lead time of up to 4 weeks. This is only on a small number of products and you will be contacted upon purchase and entitled to a full refund if required.

For Items over 35kgs, please review our delivery charges here

For full delivery terms please click here

International Delivery

If you want your order delivered to a remote area please contact our one of our Sales Representatives on 0800 112 3134 before placing your order and we will assist you further.

Returns

Please note specific items may incur a restocking charge as they are made to order, the cost of which, it determined by the manufacturer not ourselves. Items that are made to order or cut to specific length e.g. Hose cut to specific length may not be entitled to a refund.

Please contact customer services for clarification.

Unused, unaltered items may be returned at the buyers expense for credit upon Anchor Pumps prior written consent and upon the terms specified by Anchor Pumps.  The buyer assumes all risk of loss of such returned goods until actual receipt and acceptance by Anchor Pumps.  Please click here to view Returns information.

Request a Call Back Live Chat