Part Number Change Was 011K7100
Grundfos Unilift KP 150-M-1 drainage pump provides an ideal solution to many dewatering and transfer duties, including sump/cellar drainage, dewatering of tanks, pools and many other domestic and commercial applications.
The high quality specification of these pumps is reflected in the use of long life stainless steel components, and in addition all single phase models feature an automatic safety thermal cut-out switch built into the motor, to protect the pump in the event of overheating through dry-running.
The wet rotor design enables the pump to withstand dry running for short periods, whilst the open impeller construction with sling and bevelled edge vanes prevents fibres and other debris from jamming the pump.
A strainer at the base of the pump permits the passage of particles or solids in suspension upto 10mm in diameter for models KP150, KP250 and KP350.
This pump is complete with 5 Metres of mains cable, no floatswitch and has a 1 1/4" BSP Female discharge port.
|Dimensions||214mm x 140mm x 225mm|
|Manufacturers Warranty||2 Years|
|Connection Type||1 1/4 Inch BSP Female|
|Voltage||240V 1Ph 50Hz|
|Max Flow||8 m3/h|
|Full Load Current (FLC)||1.3A|
|Cable Length||5 Metres|
We offer free standard delivery to any UK address on a 3-5 working day delivery time on all orders over the value of £60 + vat. This is not weight restricted
Next day delivery is charged at £12.50 + vat for items under 35kgs. Orders need to be placed before 5pm Mon-Thurs or 4:30 on Friday for guaranteed Next Day Delivery.
Next day delivery is not available for UK Highlands and Islands. Please click the following link to view postcodes/areas that don't qualify for next day delivery.
Due to some product specifications, there may be a lead time of up to 4 weeks. This is only on a small number of products and you will be contacted upon purchase and entitled to a full refund if required.
For Items over 35kgs, please review our delivery charges here
For full delivery terms please click here
If you want your order delivered to a remote area please contact our one of our Sales Representatives on 0800 112 3134 before placing your order and we will assist you further.
Please note specific items may incur a restocking charge as they are made to order, the cost of which, it determined by the manufacturer not ourselves. Items that are made to order or cut to specific length e.g. Hose cut to specific length may not be entitled to a refund.
Please contact customer services for clarification.
Unused, unaltered items may be returned at the buyers expense for credit upon Anchor Pumps prior written consent and upon the terms specified by Anchor Pumps. The buyer assumes all risk of loss of such returned goods until actual receipt and acceptance by Anchor Pumps. Please click here to view Returns information.